|
2.1 정밀 온도계 (PRECISION
THERMOMETER)
2.1.1 기준 유리제 온도계
2.1.2 RESISTANCE THERMOMETRY BRIDGE: 모델 F18
정밀 디지탈 MULTIMETER + 온도측정: 6001(0.5PPM정도)
2.2 표준 온도계 (STANDARD THERMOMETER)
각종 정점교정용 CELL 및 관련기기
물의 3중점 CELL
BLACK BODY TARGET RADIATION SOURCE
표준 백금저항 온도계: 909,962
정밀급 열전대
2.3 온도 교정용 BATH (TEMPERATURE CALIBRATION BATH)
전기식 ICE POINT SYSTEM: ZEREF
PORTABLE TEMPERATURE CALIBRATOR Model
D40
온도교정용 BATH( NON-LIQUID)
온도교정용 BATH(LIQUID)
2.4 온도 교정용 DRY BLOCK (DRY BLOCK TEMPERATURE
CALIBRATOR)
2.5 온도 교정용 신호 발생기 (TEMPERATURE SIGNAL
SIMULATOR)
CC-TEMPJ------J
THERMOCOUPLE SIMULATOR
120,000원
CC-TEMPK------K
THERMOCOUPLE SIMULATOR
120,000원
2.6 정밀 습도계 (PRECISION HUMIDITY
METER)
초정밀 노점 습도계: DP8
2.7 정밀 노점계 (PRECISION DEWPOINT METER)
휴대형 자동 노점 측정기 : SADP
, SUPER-DEW DELUX
상대습도 노점계: Model Ultracust
(temperature: -40 to 100'C, dew-point: -40 to 90'C)
2.8 습도 교정기 (HUMIDITY GENERATOR)
휴대형 습도교정기(GENERATOR): C1
습도 교정용 BENCH TOP HUMIDITY GENERATOR:2500
2.9 습도 교정용 항온 항습 CHAMBER (HUMIDITY CALIBRATION
CHAMBER)
완전자동 습도교정 기준 항온항습챔버: 8500
Controlled Humidity Chamber Model
506A , 518
Low Humidity Generator Model
3900 : 0.05 to 12,000ppm, Ambient to 300psi, Saturation
for pressure accuracy: ±0.05%
2.10 습도 교정용 시약 (HUMIDITY CALIBRATION CHEMICALS)
습도 교정시약: 15%RH, 78%RH
RHA-33
------------33% RH Humidity Calibrator
40,000원
RHA-75
------------75% RH Humidity Calibrator
40,000원
2.12 정밀 압력 측정기 (PRECISION PRESSURE TESTER)
DIGITAL PRESSURE AND AIR VELOCITY
METERS
- DB2 Digital
Barometer - Analogue and RS232 outputs with software
- DM2 Digital
Manometer - Analogue and RS232 outputs with software
- PVM50 -
Digital display for pressure and velocity. 0-1 volt output
- PVM100 -
Digital display for pressure & velocity with memory and backlit
display. & RS232 output,
- MEDM 500
& 5k - Digital display for pressure, velocity and volume flow
with inbuilt compensation features, analogue output and memory. 0-1mA
output
- KAL84
Digital Pressure Calibrator
2.13 초정밀 마노메터 (PRECISION MANOMETER)
- Type 4 -
Portable and laboratory versions of precision Test Manometers (twin
limb)
- Type 5 -
Portable and laboratory versions of precision Test Manometers (single
limb)
- Type 6 -
Portable Test Manometers (compact version)
2.14 기준 분동식 압력계 (DEAD WEIGHT TESTER)
HYDRAULIC DEADWEIGHT TESTER Model
T-50
Deadweight
Test Kits
Precision
Deadweight Tester
Hydraulic
Deadweight Testers Model T-100
Pneumatic
Deadweight Testers
Dual
Column Deadweight Testers Model DM-T-100 (0 - 1000psi)
Digital Pressure Calibrator : Model
C700/P (0 to 10,000psi)
Ranges from 1 to 5000 bar, 10 to 75 000 psi with accuracy to ±0.015%
of reading. |
|
Ranges from -1 to 40 bar, -14.5 to 600 psi with accuracy to ±0.01%
of reading. |
|
Pressure / Vacuum ranges from 10 to 2000 mbar with accuracy to ±0.01%
of reading. |
|
A cost effective hydraulic deadweight tester to 700 bar, 10 000 psi
± 0.025% accuracy. |
|
Pressure ranges from 0.2 to 700 bar, 4 to 10 000 psi hydraulic
pressures to ± 0.015% |
|
2.15 압력
교정기 (PRESSURE CALIBRATOR)
RALSTON 압력교정용 펌프: Vacuum
Calibrators to 23" HG
: Model
VPGV
DPOV
0005 (vacuum ) , DPOV
0000 (60 psi) , APGV 0000 (220psi) , APOV 0010 (220psi) ,
RALSTON 유압펌프
: HPGV
0000 (3000psi) , HPPGV 0000 (5000psi)
RALSTON : Fitting
, Pump Adapter , Calibration
Manifold
Hand Pumps
: HTP-1 (0 to 700bar) , HTP1-1000 (0 to 1000 bar)
Vacuum
Hand Pump T-750 , T-810,
T-811
PNEUMATIC HAND PUMP : Model
T-730, 740
Pressure Calibrator Manometer : T140
Microprocessor Based Pressure Calibrator : PPC-9001
Handheld Pressure Calibrator : ATE-1
Pressure Calibrators, Handpumps & Test Gauges : EPC
2000
Precision Pressure Calibration System : CAL-PAL
(0 -200 psi)
Precision Pressure Calibrators and Pumps : PPC
Pneumatic pump, PPC
Hydraulic pump
Pressure/Vacuum Calibrators : PC6
PRO (0 to 15,000psi)
Portable Pressure Calibrator : DPI
603
Portable Pressure Calibrators : DPI610PC,
DPI610HC, DPI610LP,
DPI610PC, DPI610HC
Precision Portable Pressure Calibrator : DPI605
HYDRAULIC
PUMP CALIBRATOR WITH HOSE FITTING Model T-620
ETN
Pressure Calibration Standard :Pressure Source Contained
ETN
PRESSURE and Vacuum CALIBRATION STANDARD Model UPC5100-B :
Pressure Source Contained
Precision
Digital Pressure Calibrator : -30"Hg to 15,000psi
Pressure
Comparators
Digital
Pressure Calibrators
 |
PM105
Pressure Indicator |
|
PM110H
Pressure Calibratora PM110H is a portable pressure
calibrator that combines PM105
with a high-pressure pump in a complete calibration kit. The kit
includes case, testhose, battery charger, BSP-BSP and BSP-NPT
adapters. The pump can be used with water, oil or skydrol. Pressure
range: 0 to +700Bar(G). |
|
PM110L
Pressure Calibrator PM110L is a portable pressure
calibrator that combines PM105
with a vacuum/pressure air pump in a complete calibration kit. The
kit includes case, testhose, battery charger, BSP-BSP and BSP-NPT
adapters. The unit is supplied with traceable certificate.
Pressure range: -0,8 to +20Bar(G). |
|
PC700
Pressure Calibrator PC700 is a portable pressure
calibrator with range from 0 to 700Bar(G). The unit is also supplied
in a marine version, PC350M with pressure range up to 350Bar(G).
IS approval applies according to Exia IIC T5.
Temperature range: -10°C to +50°C.
The unit can be delivered with ±0,05%FS, ±0,1%FS or ±0,15%FS
accuracy. |
|
PC400
Pressure Calibrator With
the exception of pressure range, oil volume and weight PC400 has got
the same specifications and functions as PC700.
PC400 is specially designed for laboratory use.Oil-filled units are
delivered in 0-50Bar(G) and 0-400Bar(G) ranges.
Water-filled units are delivered in 50Bar(G) range only.
IS approval applies according to Exia IIC T5.Accuracy ±0,05%FS.
Temperature range: -10°C to +50°C.
The unit is equipped with an RS232 interface for use with the PreCal
software. |
PCA-350 Pressure Calibrator Analog ( range 0 to
350bar ) including 3 analog indicators
|
|
|
The LTP1 is a portable hand operated pressure and vacuum
pump generating up to 3000 mbar, 45 psi pressure or -850
mbar, 25 in Hg vacuum.
|
 |
The TP1 Pressure Test System has been introduced to
complement an already extensive range of pressure
calibration products and can be used for calibration checks
on pressure transmitters, pressure switches, indicators,
recorders and controllers. -0.85 to 25 bar, -12.3 to 360 psi |
 |
|
HTP1 is lightweight, easy to use and can generate pressures
up to 1000 bar, 15 000 psi. HTP1 is well suited for
calibrating pressure transmitters, pressure transducers,
pressure switches and pressure gauges.
|
 |
The 'PRV12' range of relief valves provides a compact
solution to the protection of sensitive instruments from the
danger of overpressure under low flow conditions. Five
adjustable ranges to 1000 bar, 15 000 psi. |
 |
A new high pressure hose kit to augment the HTP1 Hydraulic
Hand Pump. 1000 bar, 15 000 psi safe working pressure. |
 |
|
|
The PC6 Pressure Calibrator combines the latest developments
in pressure instrumentation with advanced sensor and
component technology to offer a versatile calibration
instrument. -1 to 1000 bar, -14.5 to 15 000 psi |
 |
The PC6 Pro Pressure Calibrator combines pressure
measurement with both source and sink electrical facilities
for a complete process calibration solution. |
 |
Bench/Panel Mounted version
Having a bench type, this PC6-Pro is ideal for internal uses
such as laboratories and R&D applications.
|
 |
The PC6-IS Pressure Calibrator is the Intrinsically
Safe version of our popular PC6 Pressure Calibrator
specifically designed for use in Hazardous Environments such
as those found in the offshore and petrochemical industries. |
 |
The robust PC6-AV is the most recent development in
aerospace calibration utilizing 'state of the art'
technology to provide versatility and flexibility. It is
designed as a 2bar / 30psi absolute unit which can be used
as a barometer. The PC6-AV can calibrate Air Speed
Indicators, Altimeters, and can also perform leak tests on
the pitot system. It can be used with all types of aircraft. |
 |
SiCal is a menu driven software based on Virtual Instrument
Technology developed by the engineering team at SI with its
in depth knowledge and many years experience of pressure
calibrator design for many applications in the pressure
measurement field.
|
 |
The EPM has been developed to work in conjunction with the
PC6 Pressure Calibrator to provide additional pressure
ranges without incurring the full cost of extra calibrators.
-1 to 1000 bar -14.5 to 15 000 psi |
 |
The DPM is an intelligent pressure module for use with a PC,
intelligent terminal for cost effective pressure
calibration, measurement and logging applications. |
 |
The DTG-2K Digital Test Gauge offers an accurate and
convenient replacement to standard analogue test gauges.
Available in five standard ranges, the unit can display any
of the following pressure units (bar, mbar, kg/cm? psi, MPa). |
 |
|
Similar to the pneumatic kits principle
but with pressure generation utilizing the HTP1 hydraulic
pump. |
All these kits use the PC6 as the
master instrument for high accuracy portable calibration. |
|
2.18 정밀 미세 전류 전압 측정기 (PRECISION
MV/MA INDICATOR)
PC-BASED DIGITAL MULTIMETER: 8047
2.19 MV/MA 발생기 (MV/MA SIMULATOR)
MILLIAMP CALIBRATOR : Easycal, Unical
CC-420-----------4-20
mA CURRENT CALIBRATOR
300,000원
CC-421-----------4-20
mA CURRENT CALIBRATOR
210,000원
CC-422-----------CURRENT
CALIBRATOR
170,000원
CC-MA------------4-20
MA SIMULATOR
150,000원
2.20 정밀 저항 측정기 (PRECISION RESISTANCE METER)
표준 저항기 (STANDARD RESISTORS)
2.21 저항 발생기 (RESISTANCE SIMULATOR)
2.25 MULTI 교정용 시험 장비 (MULTI TEST BENCH FOR
TEMPERATURE, HUMIDITY, PRESSURE, MV/MA)
MCS100 SYSTEM
Resistance Substitution Unit: Model
236A
High Accuracy Decade
Resistance Substituter: Model
HARS-X-4-0.001
Resistance
Temperature Detector (RTD) Simulators : Model
ET2000
Resistance Stanards:
SRL-Laboratory Std.
Economy Decade Boxes
Resistance-Capacitance-Inductance: Model
RCS-502
2.30 정밀 풍속계 (PRECISION AIR VELOCITY METER)
2.31 레이저 풍속계 (LASER AIR VELOCITY METER)
2.32 풍속 교정용 풍동계 (WIND TUNNEL)
Open
Jet Wind Tunnel, Airflow
Demonstration Equipment
미니 풍량계 : Testo
Mini-Tunnel
2.35 열전대 용접기 (THERMOCOUPLE WELDING M/C)
Fine Wire Welder / 열전대용접기 Model
: L60+
Water Micro - Welder / 용접기 / Model
: A (Super)
2.40 소음 발생기 (SOUND LEVEL GENERATOR)
CEL-282/284Acoustic
calibrator
SC-940A
----------SOUND CALIBRATOR
SC-941
------------SOUND CALIBRATOR
2.41 진동 발생기 (VIBRATION GENERATOR)
Model
DI 823
Aco
진동시험기
2.42 토크 발생기 (TORQUE GENERATOR)
2.43 PH 교정기
CC-PH------------PH
SIMULATOR
150,000원
|
)
)
