Hardness Tester with Test Block & Lazy Hand Assembly Model 307L
\870,000
PZ0155103
Models 307L & 409. The Models 307L and 409 Durometers are designed to measure the indentation hardness of materials such as hard rubber, plastics, epoxies and other similar Type D materials. These instruments are built to meet or exceed current ASTM D2240 specifications.
|
Hardness Tester with Test Block, Lazy Hand Assembly and Calibration Test Report Model 409
\920,000
PZ156201
|
Hardness Tester with Test Block & Lazy Hand Assembly Model 306L
\870,000
PZ156100
Models 306L & 408. Both Model 306L and 408 Durometers are built to meet or exceed current ASTM D2240 specifications for testing Type A materials. The Models 306L and 408 measure the indentation hardness of rubber, elastomers, and other rubber-like substances such as neoprene, silicone, vinyl, nitrile, and butyl. They can also be used for soft plastics, felt, leather, and similar materials. These durometers can be used either with a test stand or as hand-held testers. Both models can be used with Model 471 Test Stands.The Models 306L and 408 Durometers come complete with carrying case and test block. The durometers come standard with an ancillary hand for indicating peak readings.
|
Hardness Tester with Test Block & Lazy Hand Assembly and Calibration Test Report Model 408
\920,000
PZ156200
|
Hardness Tester with Test Block Model 302SL
\900,000
PZ156203
Model 302SL. Foam & Sponge Rubber Durometer measures the hardness of soft materials such as foam rubber, sponge rubber, disposable diapers, jells, doughs, etc. This instrument can preform comparative hardness tests on foam or sponge rubber without the cost of using indentation load deflection (ILD) test machine. Model 302SL offers a cost-effective means of checking these materials with speed, portability, and accuracy. The Model 302SL is based on the force of a variable load over an area of one square centimeter. The instrument is simple to use and can be used in conjunction with the Model 470 Test Stand for faster and more precise testing. The sample should have an area of at least 1 1/4" square and be at least 3/4" thick. Thinner materials must be stacked to obtain this thickness.
|
Hardness Tester with Test Block Model 411
\970,000
PZ156204
Model 411 Type 00 Durometer. Model 411 has a mainspring with a load force of 113 gf and a 3/32" hemispherical indenter. This instrument is used to test the hardness of materials such as sponge rubber, soft rubber and similar materials.
|
Test Stand for Modesl 411 and 302SL
\1,380,000
PZ2156206
|
Test Stand for Models 306L and 408
\1,490,000
PZ156210
|
Test Stand for D Scale Durometers
\1,600,000
PZ156202
|
10 point NIST Certification for Hardness Testers (Durometers)
\380,000
PZ156300
|
![[Product Information]](http://www.davisontheweb.com/assets/images/pdf.gif){kind=small}