Korins Co.,Ltd.    Tel: +82-2-780-4848    Fax: +82-2-780-1244  korins@korins.com     http://www.korins.com

Pipe and Cable Locator

 
Pipe and Cable Locator Model TW-6
\1,380,000
FI03
The Model TW-6 performs the traditional finding tasks of locating underground metal objects such as pipes, cables, manhole covers, vaults and valve boxes. Primarily used by water departments, telephone companies, electric power companies, gas companies and petroleum pipeline companies to know where to dig, and sometimes more importantly where NOT to dig in making repairs or rearranging buried lines. Conductive Tracing: The is the preferred method for tracing because the transmitter makes a direct physical hook-up with the line to be traced. The included ground plate assembly plugs into the transmitter with one wire going to an alligator clamp to be attached to the pipe, non-energized wire, or conduit. This concentrates the signal on the known line to be traced and there is less chance of the signal being induced to a nearby or adjacent line to cause confusion. Tracing distances are increased 25-50% over the inductive method. Non-Metallic pipes may be traced conductively as the ground plate assembly is attached to a plumber's "snake" or electrician's "fish tape" running inside of the pipe. Inductive Locating (when no starting point): Using a four foot handle, you have the transmitter behind you and the receiver ahead, while walking a pattern to discover buried metal objects. The locations become known from meter movement and speaker sound. The ground or pavement is marked for each sensing so that a pattern emerges of underground linear objects such as pipes and cables, or separate items such as a buried manhole cover. Inductive Tracing: When one point is known on a linear conductor such as a pipe or cable, the transmitter portion of the TW-6 can be placed over it and tracing can go in either direction from the point. You then walk out the path of the line and "wag" the receiver left and right over the line. At a distance from the transmitter, the signal will become faint but the transmitter can be brought up to that point so tracing can continue to the end of the line.
 
Carrying Case for Pipe and Cable Locator
\200,000
FI24
 
Stereo Headphones for Pipe and Cable Locator
\66,000
FI09
 
3 piece Handle Kit for Pipe and Cable Locator
\220,000
FI06
 
Coupling Clamp for Pipe and Cable Locator
\430,000
FI13
 
Depth Finder Probe for Pipe and Cable Locator
\660,000
FI26
 
Tracer Probe for Pipe and Cable Locator
\400,000
FI12
 
Battery Re-charge Kit for Pipe and Cable Locator
\200,000
FI07