| Mechanical |
Size: 114mm x 55mm x
40mm (not including lens) + add’l 50mm cable clearance
Mounting: Four M4 threaded holes (on bottom of unit), 7.9mm depth
Weight: 170g / 6 oz. (without lens) |
| Power
Requirements |
24 Volts DC, 210 mA
at 24 Volts (or min. 5W supply), regulated and isolated (sold separately)
Additional 30W required per DVT LED array light used |
| Operating
Temperatures |
50 degrees C, 122
degrees F |
| Image
Sensor |
4.8mm x 3.6mm
(1/3" format) CCD -Electronic Shuttering (10m
– 1s exposure times)
640 x 480 pixel resolution - 7.4 mm x 7.4 mm, square pixels |
| Optics |
CS mount standard -
C mount-capable with included adapter |
| External
Ports |
RJ-11
RS-422 serial communications
RJ-45
Ethernet communications
15 pin high density D-Sub
Power and Digital I/O |
| Digital
I/O |
24 Volts DC - 12
configurable inputs & outputs
NPN (current sinking) inputs, PNP (current sourcing) outputs, active high signals
Input can sink up to 1.5mA and outputs source a maximum of 100mA
Connect with fully populated, double shielded, 15-pin high density D-Sub Cable (sold
separately) |
| Chanel
A |
Ethernet
communications - 10/100 megabit Ethernet - TCP/IP protocol
Connect with a Category 5, shielded twisted pair (STP), EIA568 cable (sold separately) |
| Chanel
B |
RS-422 serial
communications - Up to 115.2k baud rate
Connect with a Category 5, shielded twisted pair (STP), USOC cable (sold separately) |
| Certifications |
CE Approved |
| Inspection
Speed |
6 to 6000
inspections per minute |
| Image
Acquisition |
2ms – 40ms
(partial to full image acquisition) |
| Product
Stor |
Up to 300 (depending
on file size) |
SmartImage
Sensors
