 |
|
MODEL |
HPA - C7 |
HPA - CT7 |
HPA-CTW |
HPA-12 |
| Appearance DIN(mm) |
80¡¿80¡¿32 |
80¡¿80¡¿32 |
80¡¿80¡¿32 |
|
|
Function |
Multy-purpose |
Timer function |
Tow sensors connectable |
Multi-purpose |
|
Adherence form |
DIN Rail |
Relay contact: 1c |
||
|
Power voltage |
85¡264VAC, 50/60Hz |
220VAC ¡¾10% 50/60Hz |
||
|
Power consumption |
Approx. 5VA |
Approx. 4VA |
||
|
Power supply to sensor |
12VDC, 200mA |
12VDC ¡¾10% 50mA |
||
|
Connectable |
NPN transistor output or relay output equipped |
NPN transistor output or relay output equipped photosensor or proximity sensor |
||
|
Output |
¡¤Relay contact: 1c(250VAC 3A, Resistive load) Rated electrical life: over 100,000 operation ¡¤NPN Transistor output (open collector) Max, sink current: 100mA, Applied voltage: DC 30V Max. |
¡¤Relay contact : 1c(2outs seperstely) (250VAC 3A, resistive load) Rated electrical life: over 100,000 operations(in power off) |
¡¤Relay contact : 1c (250VAC 3A, resistive load) Rated electrical life: over 100,000 operations(in power off) |
|
|
Response time |
Relay contact : Approx. 100mA, O pen collector : 5§Á Max. |
10ms |
10ms |
|
|
External synchronization |
Gate synchronization |
Frequency and differential sychronization |
- |
- |
|
Timer |
- |
¡¤Selectable from on-delay and one shot-delay ¡¤Time range 40ms¡1S¡ê0.4¡10S (selecatable by dip switch) |
- |
- |
|
Ambient temperature and humidity |
-10¡+50¡É, 35¡85%RH(Without dew and ice condensation) |
|||
|
Nose immunity |
Power line: 1,500VP, 0.5§Á pulse width (by noise simuration) |
|||
|
Dielectric strength |
AC 1,500V for 1minute (Between supply and output) |
|||
|
Insulation resistant |
10§Û (At 500VDC, Between supply and output) |
|||
|
Vibration |
10¡55Hz, 0.75mm amplitude, 2hour, 3directions(in power off) |
|||
|
Shock |
100§¾(Approx. 10G), 2yime, 3direction |
|||
|
Net¡¤Weight |
Approx. 160g |
Approx.260g |
||
