Piezoresistive Pressure Transducer Series 15

Piezoresistive pressure transducers with flush diaphragm. Flush diaphragms are used in applications where minimal dead volumes or very high frequencies are required or if the diaphragm could become incrusted by the media.

Excitation	Constant Current 0,5 to 5 mA; Specifications apply for 4 mA
Pressure Ranges	0,1...1000 bar (abs./rel.)
Linearity	typ. < 0,25 % FS	max. < 0,5 % FS

Comp. Temp. Range	0...50°C	-10...80°C
T.C. of Zero	< 0,05 mV / °C	< 0,1 mV / °C
T.C. of Sensitivity	< 0,01 % / °C	< 0,02 % / °C
Long Term Stability typ.	1 mV	2 mV
Signal	Ranges: 0,1...1 bar: 400 mV / bar Ranges: 2...1000 bar: 600...1000 mV FS

Note: For best linearity, the full scale signal should be kept low. At 100 mV FS, linearity of 0,1% is realisable. For highest performance with digital compensation, signals of 500...700 mV FS give best results. Silicon sensors start to fail at 600 mV, most at 750 mV, with extremes at 1000 mV at 1 mA excitation.