Quick and Easy Sheet Thickness Measurement
간단히
, 빠르게 시트의 두께를 계측한다.Desk-top Off-line Sheet Thickness Measurement System
탁상형
오프라인 두께계측장치 TM1
소형으로
책상위에 설치하여 사용가능Compact and small installation space requirement
TM1 은 소형으로 CRT, 본체, 콘트롤라를 전부 1대의 책상위에 설치가 가능하며 전원만 꼿으면 바로 사용이 가능하다.
The compact TM1 can be inserted on a desk, along with a CRT monitor and a controller. The system is ready for operation when the 100V AC power plug is connected.
계측시간
단축이 가능Short measuring time
계측속도가
100mm/sec 정도로 빠르기 때문에, 길이가 3000mm 인 제품인 경우 30초간 300점의 두께 데이터 계측이 가능하다.The TM1 measures the sheet thickness at the very high speed of 100mm/s, for a sheet 3,000mm in length, for example, the system outputs, thickness data of 3,000 points in 30sec.
조작이
간편Easy to operate
시트를
잘라서 넣고, 스위치를 누르기만 하면 자동이송기구에 따라 계측한다.The operator has only to set a sheet in the system and press a button, the sheet is fed automatically into the system.
데이터
집계 소프트웨어도 풍부함 (옵션)May kinds of data conflation software (option) are available.
재질
, 색에 따른 영향은 전무Accurate measurement is not influenced by material type or color.
로라
접촉자에 따른 접촉방식이기 떄문에 투명,색상, 금속증착물등의 영향은 받을수 없다.Since the system uses a contact-type roller probe, the measurement is always for any sheet material transparent is always accurate for any sheet material, transparent or colored, or material with metal deposits.
한눈에
제품의 두께 분포상태가 판단된다.Sheet thickness is always displayed.
칼라
CRT에, 두께트랜드그래프, 최대치, 최소치, 평균치, 표준편차를 한화면에 표시. 옵션으로 히스토그램등의 통계처리가 가능하여 , Harddisk에 데이터 저장이 가능.The color CRT monitor graphically indicates changes in thickness, along with the maximum, minimum and mean thickness values and standard deviation, Using optional functions, the system can process statistical data, such as a histogram, and can store data in harddisk .
계측데이터의
기록, 보존이 가능Provides memory storage and printout options.
계측후
프로피디스크에 보존. 옵션의 프린터를 사용하면 화면의 하드카피가 가능.A storage option is allows measured data to be saved in a floppy disk. Data on the screen can be printed out by an optional hard-copy printer.
시스템
구성 System Configuration계측화면
Screen파라메터
설정화면Offline Sheet Thickness Measuring System
코드번호
성형기 품명 로트번호 측정자파라메터
설정메뉴 설정종료 이동 선택 결정코드명
: XXXX 최대계측길이: 2000mm성형호기
A-01->1 두께방향스케일(단위): 5um품명
: psp 0.3mm Sheet 폭방향스케일: 20mm로트번호
: ABC-NO.01 데이터 평균피치: 20mm계측피치
:2mm 계측종료판정두께: 100um측정자
:홍길동 프로피 기록 : 무효기준두께
: 500um 프린터기록 : 무효상한두께
: 600um 1회전 그라프표시 : 무효하한두께
: 100um 바이어스치 : 0um1998년 11월 18일 10:23 Korins Co.,Ltd.
옵션
Options프린터
고정도타입
High-accuracy system
후직용
(2mm이상)System for thick sheet (2mm or more)
사양
Specifications일반사양
Common Technical Specification1) 전원전압 AC220V 10%, 50/60Hz
Power supply AC220V 10%, 50/60Hz
2) 주위온도 10-40 C
Temperature 10-40 C
3)주위습도 30-80%RH (결로가 않되도록)
Humidity 30-80%RH (no condensation)
4)사용주위분위기 특히 분진, 부식성가스 가 없을것
Atomosphere Large quantities of dust and corrosive gas prohibit operation.
5)진동 계측부에 기계적인 진동이 전달되지 않도록 할것
Vibration Gauge sensor should not be subject to vibration.
6)외형촌법
7) 중량
8) 소비전력
계측사양 Measurement technical specification
1) 사용검출기 리니어게이지쎈서 (측정압 120gf 측정자 40g)
Detector Linear gauge sensor (Measuring pressure 120gf probe 40g)
2)계측대상물 플라스틱시트 종이 등
Applications Plastic sheet paper and other “web”materials
3)계측시트두께 표준: 0.03 – 2.0mm
Thickness 0.03 to 2.0mm (standard)
4) 계측시트 길이 표준: 50mm to 3000mm
length of sample 50mm – 3000mm (standard)
5)측정피치 1mm
Sampling pitch 1mm
6)측정정도 검출기단체 – 최소독취치 0.001mm
Minimun accuracy Detector only minimum reading unit 0.001mm
게이지 정도 0.002mm
gauge accuracy 0.002mm
계측재현성
평균화 20mm 까지 40um범위기능
Functions변경가능한
파라메터 Variable parameters<하기 파라메타식을 48종류 등록가능>
The undermentioned parameter complete set can be registered by 48 kinds.
1)기준시트 두께 측정시트두께의 범위 (2mm 이하)
Standard sheet thickness within the measurable thickness range (2mm max.)
2) 측정레인지 길이 50-3000mm
Length of sample 50-3000mm
3) 상한두께 기준시트 두께이상
maximum thickness alarm More than standard sheet thickness
4) 하한두께 기준시트두께 이하
Minimum thickness alarm Below standard sheet thickness
5) 두께방향 스케일 1-50um
6) 길이방향스케일 20-50mm
7) 데이터 평균피치 0-50mm
8) 계측개시 종료 두께 5um-1.6mm
기능스위치
1) 플로피 기록 무효/유효
2) 프린터 기록 무효/유효
3) 1회전 그라프 표시 무효/유효
조작스위치
표시기능 디스플레이