The SMART2 Colorimeter
  • Over 50 pre-programmed water analysis factors
  • Automatic wavelength selection
  • Friendly menu-driven operation with simple six-button keypad
  • Accepts COD vials
    and cuvettes

The user-friendly SMART2 Colorimeter is the direct reading colorimeter for complete on-site water analyses.
All pre-programmed tests can be run on this compact instrument and each test features automatic wavelength selection. The entire multi-LED optical system is embedded in the light chamber and optimized for LaMotte test reagent systems. This enables the analyst to simply select the test and put in the sample with reagent. The microprocessor, which selects the wavelength, also allows the user to load up to 10 tests for analyzing custom reagent systems.

Specifications:
Light Source: LED/filter setup at 430nm, 520nm, 570nm, 630nm
Detector: Photodiode
Display: 122x32 LCD, 16x4 line graphics display
Range: 0-125%T
Resolution: 1% FS
Accuracy: 2% FS
CE Mark: Yes
Sample Cell: 25 mm round cell, 10 mm square cuvette, 16mm COD tubes
Power: 9V or AC adapter
Battery Life: 500 tests
Datalogging: RS-232, time and date stamped
Calibration: Factory set
Keypad 6-button membrane switch
Size 15 x 8 x 5.5 cm; 6 x 3.25 x 2.5 inches
Weight: 900 g (2 lbs.)

Test Factor

Range
Aluminum

0–0.3 ppm
Ammonia Nitrogen LR

0–1.0 ppm
Ammonia Nitrogen HR

0–3.0 ppm
Bromine LR

0–9.0 ppm
Chlorine

0–4.0 ppm
Chlorine Dioxide

0–7.0 ppm
Chromium

0–1.0 ppm
COD, Low

0–150 mg/L
COD, Standard

0–1,500 mg/L
COD, High

0–15,000 mg/L
Copper (BCA) LR

0–3.5 ppm
Copper (DDC)

0–6.0 ppm
Cyanide

0–0.5 ppm
Cyanuric Acid

0–200 ppm
Dissolved Oxygen

0–11 ppm
Fluoride

0–2.0 ppm
Hydrazine

0–1.0 ppm
Hydrogen Peroxide LR

0–1.5 ppm
Iodine

0–14.0 ppm
Iron (Bipyridyl)

0–5.0 ppm
Iron (1,10-Phenanthroline)

0–5.0 ppm
Lead

0–5.0 ppm
Manganese LR

0–0.5 ppm
Molybdenum HR

0–50 ppm
Nickel

0–0.8 ppm
Nitrate Nitrogen LR

0–3.0 ppm
Nitrite Nitrogen LR

0–0.8 ppm
Ozone LR

0–0.4 ppm
pH (CPR)

5.0–7.0
pH (PR)

6.6–8.4
pH (TB)

8–9.5
Phenols

0–6.0 ppm
Phosphate HR

0–70 ppm
Phosphate LR

0–3.0 ppm
Potassium

1.0–10.0 ppm
Silica LR

0–4.0 ppm
Silica HR

0–75 ppm
Sulfate HR

0–100 ppm
Sulfide LR

0–3.0 ppm
Tannin

0–10 ppm
Turbidity

0–400 FTU
Zinc LR

0–3 ppm

Description

Order Code
SMART2 Colorimeter with 4 sample tubes, AC adapter, and instruction manual, 120V/60Hz

1919
SMART2 Colorimeter with 4 sample tubes, AC adapter, and instruction manual, 220V/50Hz

1919-EX2
Small Field Carrying Case

1919-GCS150
Large Carrying Case

1919-GCS440
COD Adapter

1920
UDV Adapter

1921