Density resolution/0.0001

Top model of 200 series densimeters

with 0.0001 density resolution.

SOLID MODE

Measurement is as simple as on EW-200SG/MD-200S :Weigh the sample in air & water and specific gravity is automatically calculated. SD-200L is compulsory unit for density testing of absorbent sample.

・ Selectable measuring time & environment mode

・ Able to compensate water temperature and
specific gravity of solution on front switches.
Then, specific gravity is automatically calculated.

・ Measuring tolerance can be displayed.

LIQUID MODE　(OPTION KIT IS NEEDED)

It's become very simple with our original method & software : The glass sample is hanged into the liquid sample to measure specific gravity.

・Only 20 seconds is needed to test

・Only 50cc of liquid sample is needed.

・Simple & easy to test liquid sample after
changing kit for liquid and place sample.

PARTS & ACCESSORIES

1.Airtight Wind Shield 2. Sensor Attachment 3. Water Tank 4. Tank Stand 5. Steel Angle
6. Measuring Stand 7. Thewmometer
8. Calibration Weight 9. Tweezer 10. Adapter

Accuracy of measurement & density is 5 times more than the previous model. Less samples are needed for testing. Ability to connect with computer helps operator to store and to analyze the testing results.

・5 times more precise than previous model

・Samples floating in water can be measured easily.

・Specific gravity in room tempature can easily be compensated to optional temperature.

PARTS & ACCESSORIES

Setting mode by pushing switches