Ultrasonic Flaw Detectors







Line Card
      

"801D" SUPERSCOPE Analog Flaw Detector

A Full Featured Portable Flaw Detector with

Digital Thickness Measurement Display

Display : Full Size High Brightness 2.2"H x 2.7"W CRT with separate Backlighted LCD Thickness Display

Frequency: 1, 2, 5 and 10 MHz and broad band

Gain: Coarse Control 0 to 90 dB in 10 dB steps

Fine Control 0 to 15 dB in 1 dB steps (meets AWS D1.1)

Measuring Range: 0.50" to 50.0" with Coarse Control to 200 " with Fine Control.

Flaw Gate with audible and visible alarms

Reject Noise cancellation circuit

DAC Distance Amplitude Correction

Outputs: Flaw analog, flaw step and thickness analog

Power: 115/230 VAC (externally switched) and battery operation with integral battery charger and automatic Low Battery shut off.

On charge and low battery LED indicators.   10 Hour operation with full battery charge.

Variable position locking type handle.

Weight: 16 lbs. with battery

Size: 10.5"W x 6.5"H x 10.5"L

One year factory warranty



"FlawMike" Lightweight Digital Flaw Detector

Display:  High Resolution LCD, 3.8"W x 3.0"H Viewing Area, with Backlight

Size: Only 9.6" Wide x 7.7" High x 2.1" Deep           Weight: Only 5 lbs. (2.27 kg)

Frequency: 0.5 to 15 MHz (-2 dB)

Gain: 0 to 110 dB Gain in Steps of 0.5, 1, 2 or 6 dB

Measuring Range: 0.1"to 120" in steel

Flaw Gates: Two (2nd depends on 1st)

Fullwave Rectification

Test Modes: Selectable Pulse Echo or Dual

Damping: Selectable, 50 or 500

Pulse Repetition Frequency:

              100 to 1,000 Hz (10 steps) Selectable Low or High Pulser Power

Reject: 0 to 80%

Logic: Selectable Positive, Negative or Multi

Alarm: Red LED

Power: A.C. Mains or Batteries, Four "C" size NiCad or Alkaline

Battery Life: 8 hrs. w/o backlight, 6 hrs. with backlight

SPECIAL FEATURES:

On-Screen Amplitude Measurement: % of Full Screen Height

Set-Up Memory:  Store 80 Data Sets with A-Scans

Trig Functions: Calculate Sound Path, Projection Distance and Flaw Depth

Digital Thickness: Echo-to-Echo Measurement

Direct Report to Printers: Select Epson, HP Deskjet & Laserjest and Seiko DPU

Language: Select detween English, German, French, Spanish and Italian

Two year factory warranty



"SITESCAN 230" Digital Flaw Detector

            Display: High Brightness Color TFT LCD, 255 X 200 pixels, 3.8"W x 3.03"H

            Frequency: Broadband (1.7 to 14 MHz) and Narrow Band (1, 2, 5, 10 MHz)

            Gain: 110 dB, selectable 0.5, 2, 6, 14 & 20 dB steps

            Measuring Range: 5mm to 10,000mm (0.2" to 400")

            Resolution: to 0.01mm (0.001inch)

            Flaw Gates: Dual Bar-type with Zoom function

            Memory Capacity to store up to 20 calibration setups, 100 waveforms and                      up to 2,000 thickness measurements

            RF, Full and Halfwave Rectification, Time Corrected Gain (TGC), Distance                      Amplitude Correction (DAC) Curves

            Auto Calibration, Screen Freeze, Alphanumeric Notes and Instant Help Key

            Full bi-directional RS232 serial interface and Printer Interface

            Size: 9.3"W x 5.3"H x 7.9"D (237 x 135 x 200mm), Weight: 10.8 lbs. (4.9 kg)

Two year factory warranty

=========================================================