Laboratory Instruments
  AC-112 Photoelectric Colorimeter
  Features
　
  • High electric stability
    A new type of silicone photo-diode brings high electric stability that accurate measurement.
  • Direct reading of concentration
    After setting the concentration mode with standard solution, the concentration of each sample can be read directly.
  • Long life span of lamp
    The lamp has a long service life of 10,000 hours, so it is not necessary to replace the lamp normally.
  • Free voltage
    The power source regulator is stabilized at wide range of AC from 90V to 260V.
  • Both available for spare cuvette and round cuivette
    In addition to square cuvette, round cuvette can also be used only by fitting out with an adapter.
  • The smaller sample volume
    The minimum sample volume is 1.0ml.
  Specifications
　 Detector Silicon Photodiode

ac112.jpg (27015 bytes)
Click here!
Big size picture.
　 Filter Interchangeable glass filter
(420, 460, 510, 540, 600 nm)
　 Light Source Tungsten lamp w/lens, 6V, 0.23A
　 Display 3 digit LED (T%/ ABS/ CONC)
　 Range Transmittance 0-110% T%
　 　 Absorbance 0-1.999 ABS
　 　 Concentration C1 0-9.99
　 　 　 C2 0-99.9
　 　 　 C3 0-1999
　 Sample Volume 1.0 ml (minimum)
　 Power Requirement 90-260VAC, 50/60Hz
　 Dimensions 200(W) x 95 (H) x 150 (D) mm
　 Net Weight 2.0 kg
  Standard Accessories
　 Square cuvette 10 x 10 x 45 (L) mm 4 pcs.
　 Round cuvette 10 (ID) x 12 (OD) x 105 (L) mm 2 pcs.
　 Filter set Glass filter, 5 kinds/set 1 set
　 Test tube adapter 　 1 pc.
　 Analog cable 　 1 pc.
　 Dust cover 　 1 pc.
　 Operation Manual 　 1 copy
  　
　 Continuing research and improvements may result in specifications change at any time.