Laboratory Instruments
  AC-113 Microprocessor Controlled Digital Colorimeter
  Features
　
  • High electric stability
    A new type of silicone photo-diode brings high electric stability that enhances guaranties acurate measurement.
  • Direct reading of concentration
    After setting the concentration mode with standard solution, the concentration of each sample can be read directly.
  • No Replacement Lamp by LED
    The light source uses LED, so it is not normally necessary to replace the lamp .
  • Free voltage
    The power source regulator is stabilized at wide range of AC from 90V to 260V.
  • Both available for spare cuvette and round cuivette
    In addition to square cuvette, round cuvette can also be used only by fitting out with an adapter.
  • The smaller sample volume
    The minimum sample volume is 1.0ml.
  Specifications
　 Wavelength Range 400 to 700 nm


Click here!
Big size picture.
Photometric Range Transmittance 0-100% T%
　 Absorbance 0-1.999 ABS
　 Concentration 0-1999 Conc.
Power Requirement 90-260VAC, 50/60Hz
Display

3 1/2 digit LCD (T% / Abs. / Conc. / Factor)
Detector

Silicon photo-diode
Light Source

LED
Filter

Interchangeable glass filter
(420nm, 460nm, 510nm, 540nm & 600nm)
Sample Volume

1.0ml (minimum)
Sample Container

Round and square cuvette
Dimensions 220(W) x 105 (H) x 190 (D) mm
Electrical

85~260V, 50/60Hz, Selected automatically
Net Weight 2.0 kg
  Standard Accessories
　 Square cuvette 10 x 10 x 45 (L) mm 2 pcs.
　 Filter set Glass filter, 5 Kinds/set 1 set
　 Dust cover   1 pc.
　 Operation Manual   1 copy
  　
　 Continuing research and improvements may result in specifications change at any time.