PMA2002 Detector Bracket
The model PMA2002 positioning detector bracket is
designed to hold and position two PMA detectors at selected angles. The bracket
mounts to the PMA2100. The bracket has a threaded ¼-20 hole for easy tripod
mounting. After the bracket is tripod mounted the built in level allows for
quick leveling.
PMA2003 Detector Tripod Mount
The PMA2003 detector tripod mount adapts a PMA
series detector to a standard 1/4-20 thread for use with a standard tripod.
The PMA2005 is a control mechanism for the PMA2100. It features two solid state relays which are controlled by the PMA2100’s Value alarm and Dose alarm. Each of the two relays can control a 4 amp load from a source of 120V or 240V. The relays are optically isolated from the AC line, therefore isolating the PMA2100.
PMA2006 Data Management Software
The PMA Organizer software
provides an excellent tool to compliment the PMA. PMA Organizer is a
windows-based software package that facilitates data collection and
visualization.
PMA2009 Detector to Analog Output Box
This box converts a PMA21XX detector to an analog output. The user must
supply +6 to +30 volts, and the box generates the +/- 5 volts required to power
the detector. The analog output can be connected to a data logger or volt
meter. Since the PMA style connector is still being used, the user can use
a PMA2100 / PMA2200 or their own data logger or meter.
PMA2010 Analog Detector Power Supply
Some data loggers do not supply the negative 5 volts required for the PMA11XX
series detectors. This box allows these data loggers to use the PMA11XX
series detectors by generating the +/- 5 volts required to power them. The
user must supply +6 to +30 volts. The analog output can be connected to a
data logger or volt meter.
PMA2011 Analog Detector Power Supply AC
input
Same as PMA2010 but with an AC input. The user must supply 120VAC (240VAC
also available).