|
|
|
The BoltMike III ultrasonically
measures tension and clamp load of threaded fasteners. A
large, bright, easy-to-read display; rapid calibration
and setup; and automatic temperature compensation ensure
fast, repeatable, accurate fastener tension measurements
in many diverse applications.
กก
|
|
BoltMike III Specifications: |
Key Features: |
|
- Simultaneous
display of fastener load, stress, and elongation
- Long
40 hour life with five standard "AA"
alkaline batteries
- High
resolution VGA LCD display to verify signal and
optimize probe placement
- Large
digit and baragraph display with limits for fast
testing
- Automatic
temperature compensation
|
- Built-in
probe zero block allows easy exchange of transducers
- Regression
analysis for custom material calibration
- Windows
software to download measurements, create reports
and upload test parameters
- Direct
to printer reports
|
|
|
|
|
Physical
Description:
7.5
inches wide (191mm)
5.5 inches long (140mm)
2.2 inches deep (56 mm)
2.5 pounds (1.14kg) with batteries
Shock resistant plastic case
Weather resistant keypad
|
Software:
STRESSWARE
(WINDOWS 95/98/ME/NT/2000)
to download measurements, create
reports, upload test parameters |
|
|
|
|
|
Display:
1/4
VGA Graphic Waveform LCD
3.8 x 2.8in (96 x 71mm) Viewing Area
320 x 240 Pixel Density
Update Rate of 4 Hz
Adjustable contrast and backlight
Four-level ZOOM for signal enlargement
|
Power
Supply:
5
"AA" Alkaline or NiCad batteries
Interchangeable and easy-to-access
Operating time: 40 hours w/o backlight
A.C. Power (85 to 260 volt) |
|
|
|
|
|
Test
Specifications:
0.75
to 250in / 19 to 6350mm measurable
fastener length
10,000 fasteners in 512 groups fastener
and test memory
Two measurement modes: Initial to first
pulse; multiple echo for short fasteners
Load, stress and elongation in English and
Metric units
12 common fastener material constants |
|
|
|
|
|
|
|
| Unit
Features: |
| 1. |
Transducer
Connector |
 |
| 2. |
Test
Temperature |
| 3. |
Temp
Sensor Connector |
| 4. |
Measurement
Value
(load, stress, or elong) |
| 5. |
Coupling
Indicator |
| 6. |
Battery
Life Indicator |
| 7. |
Alarm
LED |
| 8. |
Measurement
Window |
| 9. |
RS-232
Connector |
| 10. |
A.C.
Power Connector |
| 11. |
Measurement
Signal |
| 12. |
GROUP
CAL for Custom
Material Calibration |
| 13. |
GAIN
Adjustment |
| 14. |
Zero
for Probe Exchange |
| 15. |
ZOOM
Indicator |
| 16. |
BOLT
Increment Keys |
| 17. |
Navigation
Keys |
| 18. |
Stability
Indicator |
| 19. |
Auto
Gain Adjustment |
|
|
|
BoltMike
III Kit Contents:
|
*
|
BoltMike
III Operating Manual |
|
*
|
Five
"AA" Alkaline Batteries |
|
*
|
Soft
Carrying Case |
|
*
|
4
oz Bottle of Glycerine Couplant |
|
*
|
Instruction
Card |
|
*
|
9
Pin Serial PC Cable |
|
*
|
Parallel
Interface Cable |
|
*
|
MD-00
LEMO, 10FT, Single Cable |
|
*
|
Medium
Ship Case |
|
*
|
BoltMike
III Base Unit |
|
*
|
BoltMike
III Power Supply |
|
*
|
Stressware
Software |
|
*
|
Technical
Reference Manual |
|
*
|
Temperature
Probe |
|
|
Warranty:
The
BoltMike III and StressTel fastener transducers are manufactured
in a facility
with processes confirming to ISO 9001. All BoltMike III's have a
full two-year warranty
on parts and labor excluding batteries, transducers, and cables.
|
 |
|
|
|
