BoltMike SMII
sm2

The BoltMike SMII is a portable ultrasonic bolting control system that offers simple operation, automatic waveform display, and self calibration.  The BoltMike SMII ensures accurate bolt tension in any application plus data upload and download capabilities for dependable reporting and analysis.

 

Description of Features

 *  The BoltMike SMII displays the load, stress or elongation of a fastener by ultrasonically measuring the change of length and the change in sound velocity.

 *  Built-in waveform display helps user to place transducer properly by verifying signal reception.

 * Built-in reference block makes inter- changing transducers easy.

 *  Data information can be uploaded/ downloaded to an IBM® compatible PC directly from the BoltMike SMII with utility software. This makes for easy measurement analysis and data reporting. This feature allows information to be saved for periodic comparison at regular service intervals.


To place Bolting orders, contact StressTel Customer Service @
814-861-6300

 

boltmkdrawing

 *  Compensation for change in velocity due to temperature occurs automatically.

 *  The optional Data Case offers simplicity of operation with IBM® MS®-DOS disk compatibility. It comes with a software program, 3.5" disk drive, formatted disks, integral charger, universal switching power supply, and 24 column dot matrix impact printer in a zero Haliburton case.

 *  The optional utility software program provides BoltMike SMII communication and converts ASCII text format to allow importation of data.

General Information Specifications*

Bolt length measurement range:

1.0" to greater than 174" standard.

Stress measurements range:

100 psi to unlimited.

Load measurement range:

Same rate as stress in pounds.

Elongation measurement range:

0.0001" to unlimited.

*May vary depending on  applications environment

 

Physical Description

Unit Size:

8.5 inches wide (216 mm).
5.25 inches long (133 mm).
12 inches deep (305 mm).

Weight:

15 pounds (6.81 Kg)

Temperature:

Operating: 0° C to 50° C  Storage: -20° C to 70° C.

Battery Charger:

100 to 120 VAC or
220 to 240 VAC/ 48 to 66 Hertz / 10 watts maximum

Ultrasonic

Pulser

Amplitude 350 volt
Fall time < 30 nsec

Receiver

Maximum gain 70 db
Bandwidth 1 to 15 MHz

Timing

Clock frequency 360 MHz
Stability 0.6 PPM/° C
Drift 0.35 PPM per year

[StressTel] [Thickness] [Flaw Detector] [Transducers] [Bolting
IllumLine

Korins Co.,Ltd.
Rm301, #24-2, Youido-Dong, Youngdungpo-Ku, Seoul, Korea
Tel. : (02)780-4848 Fax.:(02)780-1244, 786-1244

sales@korins.com