CTG-10 COATING THICKNESS
DIGITAL GAUGE
Application
The gauge provides two kinds of coating thickness measurements,brutalizing the
characteristics of eddy current or of magnetic resistance.By fixing an appropriate
probe(eddy current probe or magnetic probe),you can detect the thickness of insulating
coating on non-magnetic conducting substrate or non-magnetic coating on magnetic substrate
non-destructively. By special calibrating method,the thickness of chromic coating on
copper substrate or non-magnetic conductive coating on insulation substrate can be
comprehensively applied to manufacturing or metal processing profession as well as in
commercial inspection or examination sector.
Main Functions
- Ten types of probe are available to cover a whole range of specialist measurement
requirements:F-probes(ferrous) and N-probes (non-ferrous)
- Four methods can be used to calibrate the COATER
- Special feature:calibration through coating(CTC)
- Five different statistical parameters can be calculated,displayed,and printed
- Two measuring modes can be selected:continuous and single
- Two operating modes are provided:direct and application/bath
- The memory has a storage capacity for up 3000 readings
- Histogram can be printed out for further analysis of measured values
- Limits can be set,outside limits warning will be given
- Automatic or manual switch-off
- Easy deletion of wrong settings or readings
- Retrieval and print out of stored readings if desired
- Buzz prompts next step of operation
- Low battery indication
- Errors during operation indicated by buzzing and error codes on L.C.D.
- Instrument can be used with or without the integral/removable print
Main Technical Data
- Measuring range:0-5000 µm
- Guaranteed tolerance:±1% H +1µm(where H = N nominal value)
- Min.substrate thickness:F1-probe 0.5mm/N1-probe 0.3mm
- Min.diameter of substrate:F1-probe 3mm/N1-probe 6mm
- Operating temperature:0-45°C
- Power source:4×1.25V NiCd batteries
- Dimensions:270×86×47mm
- Weight:650g