HARDNESS TESTER HLN-11
Brief
HLN-11 is an advanced hand-held hardness distinguished by its high accuracy,
wide
measuring range, and simplicity of operation. It is suitable for testing on various
conditions and environments.
Typical Applications
- In-situ testing of individual parts, or components in assembled machines
- Mould surface of a die
- Heavy components e.g. rolls for rolling mills, etc.
- Quick analysis of pressure vessels, turbo-generator sets, etc.
- Testing in a production line e.g. crank-shafts, cylinder blocks, etc.
- Material identification
Functions Available
- Display test results in all various hardness scales (HRB, HRC, HB, HV, HSD,
HL)
- Test in any angle, even up-side-down
- Convert to Ultimate Tensile strength
- Immediate cover between harness scales, and print-out of desired
- Input of test number on date
- Input print-out of material type, and test direction Print-out of test results via
integral printer if needed
- Battery low individual Protective carrying case complete with test block,
supporting, cleaning brush, battery charger
- Seven impact device available: D ,DC ,DL ,D+15 ,C ,E ,G
Technical Specification
- Overall dimension: 270 x 86 x 47mm
- Total weight: 650g(including impact device and printer)
- Operating temperature: electronics: -10 to +45°C ; impact device:-20 to +120°C
- Tolerance: ±0.8%
- U.T.S. Measuring range: 370-2000[10N/m]
For more information contact us
TH130/132/134 INTEGRATED HARDNESS TESTER
Brief
TH series are advanced integrated hardness tester distinguished by its very compact
size, high accuracy, wide measuring range and simplicity of operation. They are suitable for
testing on various conditions and environments.
Typical Applications
- In situ testing of large and/or heavy components, items already installed as parts of
machines
- During manufacture, especially of mass produced components
- In the stores for material identification
- In locations with difficult access, or in confined spaces
Technical Data
TH130
- Size:150 x 22 x 53mm
- Impact device: D
- Impact energy:11Nmm
- Test tip: Tungsten Carbide
- Measuring accuracy: mean uncertainty ±1.5%
- Weight:130g
- Operating time :8 hours continuous use/rechargeable
- Impact direction: any angle
- Operating temperature:0°C to + 50°C
TH132
- Size:155 x 24 x 55mm
- Impact device: Integrated model C1
- Impact energy:2.7Nm
- Test tip: Tungsten carbide
- Measuring accuracy: ±1%
- 8 hours for continuous use/rechargeable
- Impact direction:0°, 45°, 90°
- Operating temperature:0°C to 45°C
TH134
- Size:210 x 24 x 55mm
- Impact device: Integrated model DL1
- Impact energy:11Nm
- Test tip: Tungsten carbide
- Measuring accuracy: ±1%
- Weight:200g
- Operating hours:8 hours for continuous use/rechargeable
- Impact direction: any angle
- Operating temperature:0°C to 45°C
For more information contact us
TH200 Shore Rubber Hardness Tester
Main function:
TH200 cancels and locks in the peak value, makes the average
value calculation and under-voltage alarming.
The RS232 communication cable connector to be carried out with
the machine can carry out the data communication with computer.
Automatically switch off
Measuring range: 0-100HA
Measurement deviation: within 20-90HA
HA < +1 grade
Technical Specifications
| Test scales available |
Shore A |
| Standards |
DIN53505,ASTM D2240 |
| Result display |
Hardness result, Average value, Max value (peak value lock),
Battery indication |
| Result display resolution |
0.1 unit |
| Data output |
RS-232 |
| Statistics |
Total test, Highest hardness, Average |
| Features |
Automatic shut off, battery low alarming |
| Operating temperature |
0 - 40°C |
| Power requirements |
3 x 1.25V batteries(V357) |
| battery life |
300Hours |
| Dimensions |
145g |
Standard delivery
- Main unit
- Batteries
- Case
- Manual
- Time Certificate
Optional accessories
- Data cable to pc
- Operating stand with constant load THS-200S
For more information contact us
TH300 Rockwell Type Hardness Tester
Main Characteristic
- Having horizontal "convex nose" structure
- Tests on difficult to approach area
- Tests internal surfaces of ring parts from 23mm diameter
- Tests external surfaces of parts in form of round bars down
to 3m diameter
- Automatic test process
- Simply and easy selectable operation menu
- Clear matrix backlit LCD
- RS-232 data output
Technical Specifications
| Hardness parameters |
Rockwell A,B,C,D,E,F,G,H,K,L,M,P,R,S&V |
| Hardness resolution |
0.1 of a Rockwell unit |
| Pre-load |
10kgf (98.7N) |
| Total load |
60kgf (588.4N),100kgf (980.7N), 150kgf (1471N) |
| Display |
Matrix backlit LCD |
| Languages in the menu |
English, German, French |
| Data entry |
Membrane kaypad, menu driven |
| Test process |
Automatic |
| Load duration |
1-50 seconds, can be set or stored |
| Data output |
RS232 serial port for printer/computer |
| Menu features |
- Hardness tolerance setting (upper and lower
limits)
- Conversions: Vickers, Brinell, Rockwell superfical, UTS
- Statistical data: X-bar, s, max, min
- Automatic curvature correction for cylindrical and spherical
surfaces
|
| Application standard |
JB/T
74009-94,
ISO6508 |
| Specimen accommodation |
- Vertical space 250mm(10")
- Horizontal space (from center-line) 150mm(6")
|
| Specimen access |
- External surfaces
- Cylindrical surfaces down to 3mm diameter
- Internal surfaces from 23mm diameter
|
| Power supply |
220V/110V, 50Hz, 4A |
| Dimensions |
Width 225mm, Depth 715mm, Height 790mm |
| Net weight |
120kg |