CTG-10 COATING THICKNESS
DIGITAL GAUGE
Application
The gauge provides two kinds of coating thickness measurements,brutalizing the
characteristics of eddy current or of magnetic resistance.By fixing an appropriate
probe(eddy current probe or magnetic probe),you can detect the thickness of insulating
coating on non-magnetic conducting substrate or non-magnetic coating on magnetic substrate
non-destructively. By special calibrating method,the thickness of chromic coating on
copper substrate or non-magnetic conductive coating on insulation substrate can be
comprehensively applied to manufacturing or metal processing profession as well as in
commercial inspection or examination sector.
Main Functions
- Ten types of probe are available to cover a whole range of specialist measurement
requirements:F-probes(ferrous) and N-probes (non-ferrous)
- Four methods can be used to calibrate the COATER
- Special feature:calibration through coating(CTC)
- Five different statistical parameters can be calculated,displayed,and printed
- Two measuring modes can be selected:continuous and single
- Two operating modes are provided:direct and application/bath
- The memory has a storage capacity for up 3000 readings
- Histogram can be printed out for further analysis of measured values
- Limits can be set,outside limits warning will be given
- Automatic or manual switch-off
- Easy deletion of wrong settings or readings
- Retrieval and print out of stored readings if desired
- Buzz prompts next step of operation
- Low battery indication
- Errors during operation indicated by buzzing and error codes on L.C.D.
- Instrument can be used with or without the integral/removable print
Main Technical Data
- Measuring range:0-5000 µm
- Guaranteed tolerance:±1% H +1µm(where H = N nominal value)
- Min.substrate thickness:F1-probe 0.5mm/N1-probe 0.3mm
- Min.diameter of substrate:F1-probe 3mm/N1-probe 6mm
- Operating temperature:0-45°C
- Power source:4×1.25V NiCd batteries
- Dimensions:270×86×47mm
- Weight:650g
TT220 INTEGRATED PORTABLE
COATING THICKNESS GAUGE
TT220 is an advanced integrated
coating thickness gauge distinguishing by its very compact size,high accuracy,wide
measuring range and simplicity of operation. It combines the ferrous F-probe and a data
processor in a single unit, automatically computes the thickness of non-magnetic coating
on a ferrous substrate by utilizing the properties of magnetic induction.Both continuous
and single measurement modes are available.
Technical Data:
- Operating principle: Magnetic induction
- Measuring range: 0 to 1250 µm
- Minimum resolution: 1µm
- Measuring accuracy: mean uncertainty one point calibration ±(3%H+1) H
=nominal value
- Measuring accuracy: mean uncertainty two point calibration ±(1-3%H+1)
H =nominal value
- Operating temperature:0 to 45°C
- Power source:2×3.6V NiCd batteries
- Dimensions:150×53×22mm
- Weight:120g
- Optional:printer
TT230 INTEGRATED PORTABLE COATING THICKNESS GAUGE
TT230 is used to test
non-ferrous metal coating thickness.
TT100 DIGITAL ULTRASONIC THICKNESS
GAUGE
TT100 is
a hand held microprocessor controlled thickness gauge specifically designed for measuring
the thickness of metallic and non-metallic materials e.g.
aluminum,titanium,plastics,ceramics,glass and other good ultrasonic wave-conductor as long
as it has parallel top and bottom surfaces.
With uses in many uses in many areas of industry TT100 can perform precise measurements
on various types of raw materials,components parts,and assembled machinery.It can also be
used to monitor all types of pipes and pressure vessels for loss of thickness due to
corrosion.
TT100 is extremely easy to use, after a simple calibration to a known thickness or
sound velocity the gauge will give accurate readings in millimeters.sound velocities for 5
different materials can be pre-set and 10 thickness readings can be stored in the memory.
Technical Data:
- Display type: 4-digit LCD
- Minimum display unit:0.1mm
- Measuring range:1.0mm-225.0mm
- Lower limit steel pipes:minimum dia. 20mm x 3mm
- Display:±0.1mm
- Sound velocity range:1000-9999m/s
- Operating temperature:-5°C to +40°C
- Frequency: 5MHz
- Update rate: 4Hz
- Power supply: 1.5V AA alkaline cells(2pcs)
- Battery life: 250 hours with one battery set
- Dimensions:126×68×23mm
TT110/120/130 Digital Ultrasonic
Thickness Gauge
Time TT110/120/130
- TT110: Special measurement for steel at special price
- TT120:Measurement under high temperature up to 300°C
- TT130:High resolution up to 0.01mm
- 5 optional probes
Main Functions
- Automatically calibrate the zero point.
- Non-linear automatic compensation. Use computer software to
correct the non-linear error of the probes.
- Indication of coupling status and low voltage. Automatic
shut down.
Technical Specifications
| Display type: |
4-digit LCD |
| Measuring Error: |
+ (1%H+0.1)mm H is the actual thickness of measuring
object |
| Power Supply: |
1.5V AA alkaline cell(2pcs) |
| Dimensions (L x W x H) |
126mm x 68mm x 23mm |
| Weight: |
170g |
Respective Applications:
- TT110: Measure
the thickness of steel. Fixed sound velocity: 5900m/S, the minimum
indicating unit: 0.1mm
- TT120: The
functions of TT110 plus measurement under high temperature. The temperature
of measuring object can be reached up to 300°C.
- TT130: When
the measuring thickness is less than 100mm, the indication resolution will
be 0.01mm.
TT300
Digital Ultrasonic Thickness Gauge
Main Characteristic
- Accurate measuring the basic shapes of various materials and fine
processed parts.
- Bigger screen display with contrast adjustable.
- Selectable display resolution: 0.1mm /0.01mm.
- Memory for 500 measured values.
- RS232 interface.
- TIME TA210 Printer can be used.